EXAR® 150 UL 3680
Exar® 150 UT is a lower cost and very thin 150°C insulated hookup wire with a wide operating temperature range. Irradiation cross-linking assures this insulation will not melt or flow at soldering temperatures. It has excellent mechanical strength, cut through resistance and good chemical and solvent resistance.
Exar 150UT processes very well on automated high speed cut and strip equipment. Cone-packs are available to maximize the through-put on the fastest automated cut, strip and terminate equipment and reduce cost. The end result is a hookup wire ideally suited to applications where a combination of flexibility, size and performance is required.
- High Temperature Rating: 150°C
- Low Temperature Rating: -55°C
- Voltage Rating: 600V
- Flame Resistance: FT-2
- Oil Temperature Rating: 60°C
- Ultraviolet Resistance: Black
- Radiation Resistance: No
- Flexibility Rating: 3
- Fluid Resistance Rating: 4
- Cut-Through Resistance Rating: 4
Specifications
Product Number |
Conductor Tinned Copper |
Nom. Conductor
Diameter in. mm. |
Nom. Insulation
Thickness in. mm. |
Nom. Finished
Diameter in. mm. |
Nom. Finished
Weight (lbs/mft) |
Ampacity 40°C, Free Air |
3680-26/XX-B0 | 26 (7/34) | .019 .48 | .016 .41 | .051 1.30 | 1.80 | 3 |
3680-26/XX-E0 | 26 (19/38) | .020 .51 | .016 .41 | .053 1.35 | 1.87 | 3 |
3680-24/XX-B0 | 24 (7/32) | .024 .61 | .016 .41 | .056 1.42 | 2.43 | 7 |
3680-24/XX-E0 | 24 (19/36) | .024 .61 | .016 .41 | .057 1.45 | 2.48 | 7 |
3680-22/XX-B0 | 22 (7/30) | .030 .76 | .016 .41 | .062 1.58 | 3.40 | 14 |
3680-22/XX-E0 | 22 (19/34) | .031 .79 | .016 .41 | .063 1.60 | 3.51 | 14 |
3680-20/XX-B0 | 20 (7/28) | .038 .97 | .016 .41 | .070 1.78 | 4.89 | 18 |
3680-20/XX-E0 | 20 (19/32) | .038 .97 | .016 .41 | .071 1.80 | 5.10 | 18 |
3680-18/XX-B0 | 18 (7/.0152) | .045 1.14 | .016 .41 | .077 1.96 | 6.55 | 24 |
3680-18/XX-D0 | 18 (19/.0092) | .045 1.14 | .016 .41 | .077 1.96 | 6.45 | 24 |
3680-16/XX-F0 | 16 (26/30) | .058 1.47 | .016 .41 | .092 2.34 | 9.99 | 31 |
3680-14/XX-H0 | 14 (41/30) | .071 1.85 | .016 .41 | .107 2.72 | 15.07 | 46 |
3680-12/XX-J0 | 12 (65/30) | .089 2.26 | .016 .41 | .121 3.07 | 23.08 | 60 |
3680-10/XX-J0 | 10 (65/28) | .111 2.81 | .017 .43 | .145 3.68 | 34.25 | 80 |
PROPERTIES | EXAR® 150 UT | |
Approvals / Listings: | ||
UL | STYLE 3680 | |
CSA | AWM 150°C 600V | |
Physical: | ||
Temperature Rating | 150°C | |
Voltage Rating (Vrms) | 600V | |
Flexibility - 7 days @ 180 °C | Passes | |
Cold Bend - 4h @ -65°C | Passes | |
Shore “A” Hardness | 98 | |
Shore “D” Hardness | 55 | |
Bend Radius | 5 X overall diameter | |
Tensile Strength: | ||
Unaged | 3000 PSI | |
Retention after 7 days @ 180 °C | Passes (100%) | |
Elongation: | ||
Unaged | 375% | |
Retention after 7 days @ 180 °C | 100% | |
Flame Test: | ||
UL 758 and FT-2 Horizontal Flame Test | Passes | |
Chemical Resistance | ||
Acetone | [email protected]°C/24h | 5-10% |
Acid – H2SO4 S.G. 1.260 5% | [email protected]°C** | <1% |
Engine Oil – ASTM D-471 IRM-902 | [email protected]°C** | 1% |
Benzene | [email protected]°C/24h | Not recommended |
Epoxy | [email protected]°C/24h | <5% |
Gasoline – ASTM D-471 Fuel C | [email protected]°C** | 2% |
Methanol | [email protected]°C** | 1% |
Toluene | [email protected]°C/24h | Not recommended |
Xylene | [email protected]°C/24h | Not recommended |
Electrical: | ||
Dielectric Constant | 2.48 |