Champlain Cable

Dataclear® Marine SecureVoice /64 cables are Low Smoke Zero Halogen (LSZH) communication cables specifically designed and manufactured for secure voice and other electronic, signal, and voice/data applications used on US Naval warships.

Dataclear® Marine /65 cables are Low Smoke Zero Halogen (LSZH) Multi-Coax RG179 Coaxial cables to serve the shipboard market.

Dataclear® Marine /69 cables are Low Smoke Zero Halogen (LSZH) 4 x 40-ohm Coaxial Data Transmission cables to serve the sub-surface shipboard market.

Dataclear® Marine /60 cables are Low Smoke Zero Halogen (LSZH) Category 5e data cables to serve the shipboard market. Typically, these stranded conductor cables are used as patch cords or where increased flexibility is a benefit.

NEMA HP 5 Type “L” EXRAD is designed primarily for New Military Equipment and Applications. It processes very well on automated high speed cut and strip equipment, making it ideally suited product for equipment and applications where heat protection, long life and less expensive wiring harnesses are required.

NEMA HP 5 Type “LL” EXRAD is specifically designed for Military Equipment and Applications. It processes very well on automated high speed cut and strip equipment, making it ideally suited product for equipment and applications where heat protection, long life and less expensive wiring harnesses are required.

NEMA HP 5 Type “LX” EXRAD is a high performance power/battery cable designed specifically for Military Equipment and Applications. It is a military cable wire ideally suited to applications where a combination of flexibility, long life and performance is required.

EXRAD® HVFX is a 150°C high voltage automotive primary wire meeting ISO 6722-1, Class D, 600V.  This wire creates opportunities to use high-voltage wires in smaller sizes than traditional HV battery cables. 

EXRAD® FX ISO 6722-1 thick-wall battery cable is designed specifically to handle the higher voltage and electrical currents required by today’s hybrid and battery power vehicles. Our thin, high temperature insulations allow for lower weight and less space.

EXRAD® FX high performance battery cable designed specifically for the best flexibility and long life. It is flexible enough for easy routing yet tough enough to withstand the roughest environments and is an automotive wire ideally suited to applications where a combination of flexibility, long life and performance is required.

EXRAD® FX ISO 6722-1 battery cable is designed specifically to handle the higher voltage and electrical currents required by today’s hybrid and battery power vehicles. Our thin wall and high temperature insulations allow for lower weight and less space.

EXRAD™ XLE high performance battery cable designed specifically for the utmost flexibility and long life. The EXRAD XLE 600/1000 volt cable is suited to meet the demands of Electric and Hybrid vehicles.

EXRAD® XLE Sensor cables are high performance cables designed specifically for commercial vehicle wheel speed or other sensor systems. EXRAD® XLE Sensor cables meets new requirements for greater temperature excursion and yet maintains a water tight seal to the over-mold.

EXRAD® RTW thin-wall rail car wire is a tough dual-layer insulation system meeting the rigorous requirements of New York City Transit's TX-TW specification.

EXRAD® RTC cables utilize EXRAD-RTW thin-wall 600V cores which reduce cable size and weight. The EXRAD-RTC jacket is flexible and robust.

Champlain's EXRAD®-Rail LSZH Control Cable products are flexible, rugged, highly flame and smoke resistant, and meet rigorous North American and European rail transit standards.

EXRAD® RCI  is Champlain's family of Ethernet and controlled impedance cables for rail applications.  These Low-Smoke Zero Hal constructions are available in Cat5E, Cat6 and Cat6A 4-pair Ethernet, as well as 120-ohm CANBus.

EXRAD-Rail low-smoke halogen-free power cables are specifically designed to meet the rigorous standards of transit and utility infrastructure.  UL 44, VW-1, ST-1 and NFPA130 flame and smoke requirements.

EXRAD-Rail low-smoke halogen-free RHW-2 USE-2 power cables meet the rigorous standards of transit and utility infrastructure. UL 44, VW-1, ST-1 and NFPA130 flame and smoke requirements. Suitable for use in wet or dry locations up to 90°C.

EXRAD-Rail Multi-Conductor low-smoke halogen-free XHHW-2, RHW-2 USE-2 power cables meet the rigorous standards of transit and utility infrastructure. UL 44, FT-4, ST-1 and NFPA130 flame and smoke requirements. Suitable for use in wet or dry locations up to 90°C.  600V or 2,000V ratings.